A sump pump installation helps in the removal of water buildup and debris collection. The sump pump is typically located in the basement of a property.
It is a handy equipment to have, especially if you live in an area prone to flooding. It quickly removes flood water from your property. This helps in preventing water damage caused by floods, which leads to very expensive repairs.
Before you consider a sump pump installation, we’ll share some practical tips and advice from Shelton Plumbing experts. This is essential information before you go ahead with the installation.
Sump Pump Installation: What You Need to Know
It’s a Permanent Installation
A sump pump, once installed, is going to be a permanent fixture in your house. When the installation is done, it’s there for good. To properly place it, the base of your floor will need to be prepped and drilled for holes.
There’s no going back when you install a sump pump. Thus, it’s essential to think about this option before proceeding with the installation thoughtfully.
It’s Not Just for the Basement
Primarily, a sump found is found in the basement of a property. However, this equipment can be installed in other areas.
Unless you reside in an area receiving very little to no precipitation for most of the year, it’s essential to have a sump pump in your home. Of course, some areas in the country are dry. The homes in these areas don’t require a basement.
Plan the Sump Pump Installation in Advance
Before you can go ahead with the installation, the basement must be cleared out first. Most homeowners use their basement as storage, so cleaning it will probably take a while.
The technician will need to have ample room to move around. The job entails a god amount of drilling into the foundation, so make sure everything is out of the way. This allows the professional to do the installation without any delays or obstructions.
Protect Your Valuables
After preparing the basement and clearing it out, you must do this next step. There may be some items in the basement that cannot be moved like the washer and dryer or some other more significant appliances.
Make sure you have coverings and sheets to protect the belongings – especially those you can’t move out of the basement. During the installation, expect a lot of debris and dirt, so it’s good to cover your belongings to protect them from debris.
Cutting cement and drilling into the foundation will produce a lot of debris and dirt, and worst-case scenario, your belongings might get damaged. Take the right precautions to protect your valuables.
The Installation Is Going to Be Loud
As mentioned above, the installation will involve a lot of cutting cement and drilling into the foundation. Thus, expect a significant amount of noise while the project is taking place. Unfortunately, there’s no going around this.
Also, when the sump pump is operational and running, it’s going to be noisy. It’s important to know this before you have the equipment installed. We mentioned above that once the sump pump installed, there’s no going back.
General Maintenance of Sump Pumps
The good thing about the sump pump is there’s no general maintenance required. You only need to have it examined by a specialist once every year. If you use it more frequently, we recommend to have it checked a few times a year.
It may need clearing up because of some sand, dirt, and gravel that might end up clogging up. When there’s a clog, the sump pump may not function as effectively. Make sure to disconnect the sump pump from the electrical connection before you do any kind of inspection or general maintenance steps.